Categories
Cobra Racing Edition 2206 CM2206 2400KV V2 Brushless Motor
Cobra Racing Edition 2206 CM2206 2400KV V2 3-5S Brushless Motor For 250 FPV Racing Multirotor Frame
Cobra CM2206 2400KV V2 Brushless Motor Features
- Has a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life.
- The performance of V2 is same with CM-V1, however, Cobra Motors add magnet locking system inside of V2. So it will be much stronger.
- Since these motors are typically soldered directly to the speed controller to save weight, the 2206 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long.
- The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.
- Designed from the ground up to be the ultimate power source for 250mm FPV Racing Quads running on 4-cell Li-Po power!
- Has 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
- The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
- Integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight.
Cobra CM2206 2400KV V2 Brushless Motor Specs
- Stator thickness: 6.0 mm (0.236 in)
- Stator diameter: 22.0 mm (0.866 in)
- Number of magnet poles: 14
- Number of stator slots: 12
- Motor KV value: 2400 RPM per Volt
- Motor wind: 20 turn delta
- Maximum continuous current: 25 Amps
- Motor resistance (Rm) Phase to Phase: 0.065 Ohms
- Motor resistance (Rm) per Phase: 0.098 Ohms
- Motor weight: 32 grams (1.29 oz.)
- No load current (Io): 0.85 Amps @ 10 Volts
- Max continuous power (3-cell Li-Po): 280 Watts
- Max continuous power (4-cell Li-Po): 370 Watts
- PWM frequency: 8-20 KHz
- Outside diameter: 27.0 mm (1.063 in.)
- Prop shaft diameter: 5.00 mm (0.197 in.)
- Motor shaft diameter: 3.00 mm (0.118 in.)
- Overall shaft length: 35.3 mm (1.390 in.)
- Motor body length: 16.5 mm (0.650 in.)
- Motor timing: 5-10 degrees
Cobra CM2206 Package Includes
- 1 x Cobra CM2206 Brushless Motor
- 4 x M3 flat washers
- 4 x M3*5mm motor mount screw
- 1 x locking prop nut with nylon insert
- 1 x machined aluminum prop washer
Free Shipping?Shipping cost only US$0
Last Updated Cobra CM2206 price:$20.99
Other Hot Selling Brushless Motor: Go to see it!
