Flywoo Naked Chasers HD 3 Racing Drone

Flywoo Naked Chasers HD 3 Racing Drone
Specification:
Brand Name: Flywoo
Model: Naked Chasers HD
Item Name: 138mm 3 Inch 6S Cinewhoop FPV Racing Drone
Version: BNF-DJI ( Built-in DJI Receiver); Frsky XM+ Receiver (Built-in DJI Receiver & External Frsky XM+ RX)
TBS Crossfire Receiver ( Built-in DJI Receiver & External TBS Crossfire RX)
Drone Wheelbase: 138mm
Material: 3K Carbon Fiber
Top Plate Thickness: 1.5mm
Bottom Plate Thickness: 2.5mm
Weight:299g
GOKU F722 F7 Flight Controller
( Click here to buy replace FC ESC Stack)
Input Voltage: 3-8s
MCU: STM32F722RET6 216MHz
Gyroscope: MPU6000
BARO: BMP280/FLASH: 16M
BEC: 5V 2A/9V 2A
Mounting Hole: 30.5×30.5 ( M3)
50A BLHELI_32 4In1 ESC
Con. Current: 50A
Burst Current: 55A (10 Seconds)
Input Voltage: 2-6S
Firmware: GOKU32_PRO
Support DShot300/600/1200
LED: 4*WS2812
Current Sensor: YES
Telemetry Function: Yes
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 30.5×30.5mm ( M3)
Weight: 10g
ROBO 1507 2900KV Brushless Motor
( Click here to buy replace motor separately)
Brand: Flywoo
Item Name: RB 1507 Motor
Stator diameter: 15mm
Stator height: 7mm
Kv: 2900KV
Bearings: NSK
Wire Length: 150 mm
Shaft size: M5
Mounting Screw Pattern: 12×12 mm
Chasers 3045 3-Blade Propeller
Item Name: 3045 3×4.5 3 Inch Tri-blade Propeller
Quantity: 2 CW & 2 CCW
Input Voltage: 2-6S
Weignt:15.6g
DJI Air Unit HD Digital System
( More Details)
SPECIFICATION
Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
Low Latency Mode (720p/120fps): <28 ms
High-Quality Mode (720p/60fps): <40 ms
Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-17.6 V, about 4-9 W
Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M
Lens: 2.1 mm, f/2.1
ISO: 100-25600
FOV: 150°(D); 122°(H); 93°(V)
Dimension: 22.1 x 21.1 x 20.1 mm
Weight: 8.2 g
Built-in DJI Receiver, Compatible with DJI FPV Remote Controller
Recommend Lipo Battery ( NOT Included)
Recommend 6S 850-1050mAh Lipo Battery w/ XT60 Plug
Optional Receiver
BNF-DJI Version: Built-in DJI Receiver
Frsky XM+ Receiver Version: Built-in DJI Receiver and with External Frsky XM+ Receiver
TBS Crossfire Receiver Version: Built-in DJI Receiver & with External TBS Crossfire Receiver
Features:
– Equipped with GOKUF722 + 50A BLHELI32 ESC Stack
– Buttery-smooth 720p 120fps FPV feed
– Pre-tuned with smooth racing Freestyle settings
– Full 3K Carbon Fiber airframe with chamfered arm
– Equipped with ROBO1507 2900KV Motors
– Integrated Bluetooth configuration module
– 3-6S Lipo compatibility
– Bind and Fly Built and test flown
– Equipped with the DJI FPV Air Unit -Bind and Fly