Categories
FPV Racing Drones

Happymodel Larva X HD FPV Racing Drone

Happymodel Larva X HD Feature

Toothpick style compatible both 2.5inch or 3inch propellers
Toothpick HD and Whoop HD 2 in 1 combo (Default Comes in Toothpick HD style)
Caddx baby Turtle provide 1080P 60FPS DVR video
New design EX1203 High efficiency brushless motors
Full range receiver options
Camera Angle adjustable
Smooth and powerful
Buzzer ready
Compatible both for 2s-3s Lipo/LIHV

Happymodel Larva X HD Specs

Brand Name: Happymodel
Item Name: Larva-X HD Micro FPV brushless Drone
Wheelbase: 125mm
Weight:
Toothpick style ductless 63g (without battery)
Whoop style ducted 79g (without battery)
Receiver: Frsky XM+
Version: BNF
Size: 105 x 105 x 35mm(without propellers)

Flight Controller:
(External RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board Size: 28.5 x 28.5MM
Power Supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Could add external receiver on the FC board
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection

VTX:
Output Power: 25~200mw switchable
Frequency: 40CH
Input Voltage: 3.3V 5.5V
Current Consumption: 300mA(type)
Antenna: Micro UXII Antenna
Frequency: 5.8GHz 5bands 40 channels
With Race band
Smartaudio ready
Weight: 3g

Caddx Baby turtle Cam:
-TV System: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
Power Input: DC 4.5-20V
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MP4
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Motor:
Model: EX1203 KV6200
Configu-ration: 9N12P
Stator Diamter: 12mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len): Φ15mm*15mm
Weight(g): 4.7g
No.of Cells(Lipo): 2S-3S

Lipo Battery
Capacity: 450mAh
Voltage: 11.4v
Continuous Discharge Rate: 75C
Size: 66mm x 21mm x 18mm
Weight: 42g
Connector: XT30

Happymodel Larva X HD Price

Geekbuying Price:$ 159.99

BUY THE ITEM

goosky rs7 rc helicopter - Happymodel Larva X HD FPV Racing Drone
FLY WING FW200 1110 - Happymodel Larva X HD FPV Racing Drone

RECOMMENDED


Categories
FPV Racing Drones

Bangwood’s GEPRC MOZ7 HD 320mm F7 6S 7-inch long-range RC FPV racing drone

Bangood’s GEPRC MOZ7 HD 320mm F7 6S 7-inch long-range RC FPV racing drone is a high-performance and durable drone suitable for both professional and amateur flight enthusiasts. This drone adopts high-quality materials and advanced technology, with excellent stability and handling performance. The following is a detailed evaluation of this drone. Firstly, from an external perspective, […]

BUY THE ITEM


Categories
FPV Racing Drones

GEPRC MOZ7 Analog 320mm Wheelbase FPV Racing Drone with 50A BLHeli_S ESCs and 1200TVL Camera – Banggood Review

Introduction For any RC enthusiast, a high-quality racing drone is a must-have. The GEPRC MOZ7 Analog 320mm Wheelbase FPV Racing Drone is a beast of a drone that is sure to impress. With its long range capabilities, 50A BLHeli_S ESCs, and a 1200TVL camera, this drone is perfect for anyone who loves to race or […]

BUY THE ITEM



Categories
FPV Racing Drones

Bangood’s Geprc Cinelog 20 HD 4S F411 35A AIO 2-inch indoor FPV racing drone

Banggood is a well-known foreign trade website that provides a variety of high-quality electronic products and outdoor equipment. Recently, I purchased a Geprc Cinelog 20 HD 4S F411 35A AIO 2-inch indoor FPV racing drone and am very satisfied. In this article, I will share my usage experience and provide you with a detailed evaluation […]

BUY THE ITEM