HEE Wing F-01 Ultra Delta Wing 690mm RC Airplane
Specifications:
Brand Name: HEE Wing
Item Name: F-01 Ultra Delta Wing
Version: KIT, PNP, PNP Professional Version, PNP+Flight Controller (optional)
Material: EPP/ABS/Carbon Fiber
Wingspan: 690mm
Height: 88mm
Length: 415mm
Max Endurance: >70 minutes
Max Mileage: >45km
Min Flight speed: <27km/h Maximum Flight speed: ≥220+km/h KIT Weight: 150g(epp-30)/190g(epp-20) Take Off Weight: 350g~850g Battery Compartment: 175mm*175mm*55mm (Max dimension) ESC Compartment: 70mm*38mm*20mm (Max dimension) Note: when speed is≥100km/h, should install lens cover to prevent excessive inflow air form blowing awa the hatch. Recommended Fuselage Protective Bottom Skid Case, Click Here 2205 Motor Specifications: Product Name: FX-2205-2350KV Dimention: 29mm*20mm Slot/pole: 12N14P Shaft Diameter: 5mm-Internal gear M3 Weight: 30g (exclude wire) Max Current: 30A Max Power: 450W Work Voltage: 2S (7.4V)~4S (14.8V) Wire Specifications: 20# - 180mm Interphase Internal Resistance: 68mΩ Max. Thrust: 922g(6*4E 2-Blade Propeller) FX35A ESC Specifications: Product Name: FX-35A Brushless ESC Rated Current: 35A ( lasts for 180 seconds) Instantaneous Current: 50A ( lasts for 10 seconds) Input Voltage: 7 4V~14.8V (2S~4S) UBEC Output: NO Dimention: 48.5*14.5mm ( exclude wire) Signal Wire: 120 mm Power Input Wire: 18#, length: 100mm Weight: 9.5g ( include wire) GDW 12g Servo Specifications: Item Name: DS031MG Metal Gear Digital Servo Voltage Range: 4.8V-6V Working Temperature: -20℃ ~+60℃ Working Frequency: 1520μs/333Hz Speed: 5V = 0.13sec/60°， 6V = 0.11sec/60° Torque: 5V = 2.25kg/cm, 6V = 2.7kg/cm Wire Length: 260mm Weight: 12g UBEC Specifications: Item Name: MAMBA UBEC 5V 2A Input Voltage: 7.4V-14.8V Output Voltage: 5V Output Current: 2A Dimension: 17x11mm Weight: 1g VTX Fixed Seat Specifications: Item Name: VTX Fixed Seat Material: ABS Seat Install Size: 47mm x 17mm Flight Controller Install Size: 30.5mm x 30.5mm / 20mm x 20mm Features: - Independent detachable lens plug for both FPV and visual observation flights - Wings have embedded carbon fiber rods with different angles - Small wingspan with large space for electronics electronics - Four magnets are applied to the hatch for better fastening - The new wingtip design supports vertical take-off mode - Supports horizontal and vertical battery mounting - Tailored lens ring for better protection - All new propeller locking method - Tailored for DJI Digital Air unit KIT Version Included: 1x Hee Wing Ultra Delta Wing EPP Body 2x VTX Fixed Seat 1x Hardware Kit 1x Lipo Strap 1x 6x4E Prop 1x 5x5E Prop PNP Version (Unassembled) Included: 1x Hee Wing Ultra Delta Wing EPP Body 2x VTX Fixed Seat 1x Hardware Kit 1x Lipo Strap 1x 2204-2200KV Motor 1x FTC 20A ESC 2x 9g Plastic Gear Digital Servo 1x HEE Wing RX-1.0 Flight Controller (English Manual, Click Here) 2x 5045 Propeller PNP Version Professional Edition (Unassembled) Included: 1x Hee Wing Ultra Delta Wing EPP Body 2x VTX Fixed Seat 1x Hardware Kit 1x Lipo Strap 1x FX2205-2350KV Motor 1x FX35A ESC 2x GDW 12g Metal Gear Digital Servo 1x Diatone 5V 2A UBEC 1x XT60 + 3.5 Banana Plug PNP+Flight Controller Version (Unassembled) Included: 1x Hee Wing F-01 Ultra Delta Wing EPP Body 1x SNL+ Flight Controller (Specifications, Click Here) 2x VTX Fixed Seat 1x Hardware Kit 1x Lipo Strap 1x FX2205-2350KV Motor 1x FX35A ESC 2x GDW 12g Metal Gear Digital Servo 1x Diatone 5V 2A UBEC 1x XT60 + 3.5 Banana Plug
