iFlight Nazgul5 Evoque F5 F5X Squadshed X Analog FPV Racing Drone
Specifications:
– Total Dimensions: 166*139mm (body dimension)
– Geometry: Squashed-X frame
– Bottom to top distance: 28mm
– Arm Thickness: 6mm
– Bottom plate thickness: 2.5mm
– Top plate thickness: 2mm
– Upper(middle) plate thickness: 3mm
– Nazgul F5 propellers
– Weight: 392.6g (without battery and mount for Gopro)
BLITZ MINI F7 Flight Controller
– MCU: STM32 F722
– Gyro: BMI270
– Baro: DPS310
– OSD: IFLIGHT OSD （AT7456E）
– BEC: 5V 2.5A
– BlackBox: 16MB
– Uart: 5*UART(UART1、UART2、UART3、UART4、UART:6)
– UART1 for VTX HD/Analog
– UART2 for Receiver
– UART3、UART4 for GPS or other sensors that require a serial port
– UART6 for ESC Telemetry
– 1×I2C
– 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
– 1xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
– 1xSH1.0 6pin connector for Any Receiver or DJI（3V3/R2/5V /G/R2/T2）
– 1xSH1.0 4Pin connector GPS (T4/R4/G/5V)
– 1xSH1.0 4Pin connector LED & Beeper (BUZ/LED/G/5V)
– 4×0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/（BAT Orange）
– Smartaudio & IRCTramp VTX protocol supported
– WS2812ledStrip: Yes
– Bepper: Yes
– Firmware: IFRC-IFLIGHT_BLITZ_F722
– Outer Size: 30.5*27mm / 20*20mm φ4 mounting
– Weight: 5.0g
BLITZ Mini E55 4IN1 ESC
Input: 2-6s LiPo
Constant: 55 Amps (per channel)
MCU: BB21
Burst: 60 Amps (per channel)
BEC: No
BlHeli32 telemetry: Yes
Dimensions: 42*35mm
Mounting Holes: 20*20mm φ3mm with Grommets φ2mm
Weight: 11.3g
Target: QH-50 16.7
5.8GHz SucceX Mini Force 600mW VTX
Power: PIT/25/200/400mW/600mW
Antenna Interface: MMCX
VTX protocol: IRC Tramp
Output: 40 channels
Package Included:
– 1 x Nazgul Evoque F5 Analog (Squashed X)
– 4 x Nazgul F5 Props
– 2 sets of Battery pads
– 2 x Battery straps
– 1 Screw bag
