iFlight Nazgul5 Evoque F6D Deadcat Analog 6 Inch 6S FPV Racing Drone
Description:
Brand: iFlight
Item Name: Nazgul5 Evoque F6D
Total Dimensions: 262.6mm (DeadCat)
Geometry: DC (DeadCat) frame
Bottom to top distance: 28mm
Arm Thickness: 6mm
Bottom plate thickness: 3mm
Top plate thickness: 3mm
Upper(middle) plate thickness: 3mm
XING2 2506 1500KV motors
6035 propellers
Camera: RaceCam R1 Mini (Analog Version)
VTX: 600MW VTX (Analog Version)
Weight: 464.3g (without battery and mount for Gopro)
FC // BLITZ MINI F7
MCU：STM32 F722
Baro: NO
Betaflight OSD：IFLIGHT OSD （AT7456E)
Blackbox：16MB
5 X Uarts
– UART1 for VTX HD/Analog
– UART2 for Receiver
– UART3、UART4 for GPS or 0ther sensors that require a serial port
– UART6 for ESC Telemetry
– 4×Dshot/PWMoutputs
– 1×I2C
– 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
– 1xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
– 1xSH1.0 6pin connector for Any Receiver or DJI（3V3/R2i/5V /G/R2/T2）
– 1xSH1.0 4Pin connector GPS (T4/R4/G/5V)
– 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
– Smartaudio&IRCTramp VTX protocol supported
– WS2812ledStrip：Yes
– Bepper：Yes
– Firmware: IFRC-BASEF4 4.X.X
– Mounting：20*20mm/φ4
– Dimensions：30.5*27mm
– Weight：5.0g
BlackBox: 16MB
DJI Air Unit Plug-and-Play. No need to solder tiny wires.
BAT, +5V, 3.3, Start indicator
With LC filter.
ESC // BLITZ Mini 55A
Dimension: 35*42mm
Mounting Holes: 20*20mm/Φ4mm
Weight: 11.3g
Supports 2-6S lipo input
MCU：G071
Constant: 55 Amps
Burst: 60 Amps
Current sensor: Yes
BEC: No
Current rate: 100
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Firmware: BLHeli 32
Target: IFLIGHT_BLITZ_G1
Package included：
1 x Nazgul Evoque F6( Deadcat version)
4 x 6035 Propellers
2 sets of Battery Pads
4 x Battery straps
1 x Screws bag
