Categories
FPV Racing Drones

iFlight Nazgul5 V2 HD 6S 5 Inch 240mm Freestyle FPV Racing Drone

Note:
The flight controller is in the update stage. From succex-E F7 to BLITZ F7. Please note they ship randomly now.
from SucceX-E F4 45A ESC to BLITZ E45S 45A ESC, Please note they ship randomly now.
USA/CZ Warehouse comes Nebula Nano version.
New Version Old Version
BLITZ F7 V1.1 Flight Controller ( Link)

Brand: iFlight
Model: BLITZ F7 V1.1
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g

SucceX-E F4 Flight controller

– MCU:STM32F405
– Gyro:MPU6000
– Betaflight OSD:YES
– Blackbox:8MB
– 4X Uarts(1 2 3 6 )
– 8 x Dshot/Proshot/Oneshot output
– 8 x individual ESC power/ signal pads
– 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
– VTX telemetry: YES
– WS2812 led Strip:YES
– Baro:No
– Beeper:YES
– Input:2-6S(Max 8S)
– BEC:5V/2.5A cont
– Firmware target : BETAFLIGHTF4
– Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
– Dimensions:36*36mm
– Weight:7.6g

BLITZ E45S 45A ESC ( Link)
Input voltage: 2-6S
Firmware: QH-40 16.7
Continuous current: 45A
Instantaneous current: 55A
MCU:BB21
Current sensor: yes scale 200
Drive signal support: DShot150/300/600MultiShot.OneShot
Weight: 15g
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
– Dimension: 40*43mm
– Mounting Holes: 30.5*30.5mm/Φ3mm
– Weight: 14.4g
– Supports 2-6S Lipo input
– STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
– Current sensor: YES
– BEC: NO
– Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
– Target: G-H-30 BLS 16.7

PRODUCT DESCRIPTION
Nazgul5 HD is a 5″ size BNF (Bind-and Fly) quadcopter with the DJI Digital FPV system on it. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our

collection of high quality TPU prints for your cam!

Specification:

Brand name: iFlight

Item name: Nazgul5 HD 4S 5 Inch FPV Racing Drone

SucceX-E F4 45A Flight Stack
XING-E 2207 FPV Motor ( 6S 1800KV )
Wheelbase: 240mm
Body Size: 170*170mm
Propeller Size: 5 inch /5.1 inch
FC Mounting Hole: 30.5*30.5/20*20 mm
FPV Cam Spacing: 19mm
Weight: 400.8g (without battery)

Feature:
– 5mm arm design for more durability
– Easy-Swap arms
– LED illuminated Logo
– XING-E 2207 motors and NAZGUL 5140 props
– 5″ version also fits 5.1″ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks

Package Included:

1 x XL5 V5 Frame
1 x Caddx Vista VTX

1 x Polar Camera (USA/CZ comes Nebula NANO )

1 x SucceX-E F4 45A Flight Stack

4 x XING-E 2207 FPV Motor ( 6S 1800KV )
1 x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Note: Camera mount for Gopro is not Included. Click here to order

SPARE PART, CLICK HERE
Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.

FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive. Link

BUY THE ITEM

goosky rs7 rc helicopter - iFlight Nazgul5 V2 HD 6S 5 Inch 240mm Freestyle FPV Racing Drone
FLY WING FW200 1110 - iFlight Nazgul5 V2 HD 6S 5 Inch 240mm Freestyle FPV Racing Drone

RECOMMENDED


Categories
FPV Racing Drones

Bangwood’s GEPRC MOZ7 HD 320mm F7 6S 7-inch long-range RC FPV racing drone

Bangood’s GEPRC MOZ7 HD 320mm F7 6S 7-inch long-range RC FPV racing drone is a high-performance and durable drone suitable for both professional and amateur flight enthusiasts. This drone adopts high-quality materials and advanced technology, with excellent stability and handling performance. The following is a detailed evaluation of this drone. Firstly, from an external perspective, […]

BUY THE ITEM


Categories
FPV Racing Drones

GEPRC MOZ7 Analog 320mm Wheelbase FPV Racing Drone with 50A BLHeli_S ESCs and 1200TVL Camera – Banggood Review

Introduction For any RC enthusiast, a high-quality racing drone is a must-have. The GEPRC MOZ7 Analog 320mm Wheelbase FPV Racing Drone is a beast of a drone that is sure to impress. With its long range capabilities, 50A BLHeli_S ESCs, and a 1200TVL camera, this drone is perfect for anyone who loves to race or […]

BUY THE ITEM


Categories
FPV Racing Drones

IFlight Chimera 9 6S Analog F7 9 Inch Long Range FPV Racing Drone – Banggood Review

In this article, we will explore the IFlight Chimera 9 6S Analog F7 9-inch long-distance FPV racing drone, which is sold on Bangwood for 1989176 yuan. We will evaluate this drone in terms of specifications, functionality, performance, and advantages and disadvantages to help you make informed purchasing decisions. specifications The IFlight Chimera 9 6S Analog […]

BUY THE ITEM