iFlight Protek35 FPV Racing Drone
iFlight Protek35 FPV Racing Drone
Specification:
Brand: iFlight
Model: Protek35 HD
Item Name: 3.5 Inch 151mm F4 4S Whoop FPV Racing Drone
Wheelbase: 151mm
Bottom Plate Thickness: 3.5mm
Upper Plate Thickness: 2mm
Size: 118*91mm
Weight: 348±10g
Beast AIO F7 45A FC ESC
Brand Name: iFlight
Model: Beast F7 45A AIO (MPU6000) 25.5×25.5
FC:
MCU: BGA-STM32F745
Gyro: MPU6000
Blackbox: 8Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: BMP280
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO
Mounting pattern: 25.5*25.5mm φ3mm
Dimensions: 32.5*32.5mm
Weight: 8.5g
ESC:
Uarts: 5
Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 200
Constant: 45A / Burst: 50A
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5*25.5mm/Φ3mm
Dimensions: 32.5*32.5mm
XING 2203.5 3600KV Brushless Motor
Brand Name: iFlight
Model: XING 2203.5
KV: 3600KV
Lipo: 4S
Nazgul 3535 Propeller
Brand Name: iFlight
Model: Nazgul 3535
Item Name: 3535 3.5×3.5 3.5 Inch 3-Blade Propeller
Quantity: 2 CW & 2 CCW
DJI FPV Air Unit
Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
Low Latency Mode (720p/120fps): <28 ms
High-Quality Mode (720p/60fps): <40 ms
Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-17.6 V, about 4-9 W
Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M
Lens: 2.1 mm, f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150°(D); 122°(H); 93°(V)
Dimension: 22.1 x 21.1 x 20.1 mm
Weight: 8.2 g
Optional Receiver
BNF-DJI Version: with Built-in DJI Receiver;
Frsky XM+ RX Version: with Built-in DJI RX and with External Frsky XM+ RX
Frsky R-XSR RX Version: with Built-in DJI RX and with External Frsky R-XSR RX
TBS Crossfire Nano RX Version: Built-in DJI RX and w/ External TBS Crossfire Nano Receiver
Recommended Battery (No Included):
Recommend 4S 1550mAh Lipo Battery XT30 Plug
Flight Time: 9-10mins Flight Time(with camera for Gopro): 6-7mins
Features:
1. The 3.5-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life.
2. Plastic protection ring, new design concept, lighter weight.
3. Excellent structural design brings a more enjoyable control feel to flight.
4. The frame is designed with inlaid copper pillars for easy disassembly and maintenance. It only needs to disassemble the top and bottom plates with a total of 12 screws.
5. With LED on the Drone Tail, the LED Color is changable which can reminds you the Battery consumption condition.
6. It is more flexible than Green Hornet and Bumblebee for FPV Racing.
