ZOHD Nano Talon EVO AIO V-Tail EPP FPV Wing RC Airplane

It’s been 3 years since we dreamed about this little park flyer able to be fun and easy to transport at the same time.
“It’s a backpack FPV plane” we thought back then… “We’ll be happy if we can do some FPV around the block with this…”
Time has proven us extremely humble in out goals regarding the Nano Talon: Thousands of units sold all around the world, fan clubs, FB pa ges and groups, e pic FPV trips (up to 35km out and back)… WAIT… again: 35km OUT AND BACK (credits to Bruno Parini)… Most “big pro” FPV planes in the market connot even dream about doing that… well, we didn’t do it: You made ZOHD Nano Talon a huge success!
To celebrate it, we’re introducing a better Nano Talon: the Nano Talon EVO.
ZOHD Nano Talon EVO Specs
Item Name: Nano Talon EVO
Brand: ZOHD
Version: PNP/ PNP With FPV Ready (With Kopilot,VC400 AIO Camera,Motor,ESC,Servos,Propeller,hardware)
Material: Crash Resistant EPP
Quantity: 1set
Wingspan: 860mm (33.85”)
Motor: Sunnysky 2204-1870KV
Length: 570mm (22.44in”)
ESC: 30A w/5V 2A BEC (Switch)
Propeller: 6×3
Servos: 9g Metal Gear
Flying Weight: 361g (w/o FPV gear)
Recommended Battery: Lipo from 3S to 4S 1300-2200mAh, Li-Ion 18650 4S 2P 3500mAh
CG: 3.5cm from the wing leading edge (marked under the wing)
Package Weight: 0.94KG
Package Size (L x W x H): 54.5 X 13.5 X 18cm
ZOHD Nano Talon EVO Features
* EPP molded wing, built-in CF spar for enhancement, light, flexible and crash-resistant.
* Updated SunnySky motor with a longer shaft, compatible with regular propellers.
* Straight wing instead of an anhedral wing to get more stable and agile attitude.
* Updated 9g servos from plastic gear to metal gear.
* Detachable main wing and tail wing for easy transport, easy to install. Improve connections for better aileron and tails stability
* Updated ESC from 30A with 5V 1A Linear BEC to 30A with 5V 2A Switch BEC.
* Enlarged battery bay for Lipos from 3S to 4S, and Li-Ions 18650 4S 2P 3500mAh
* Built-in carbon fiber spar and extended plywood inside the fuselage for more strength in case of an impact.
* Bigger NACA air-inlet provides more air cooling for FPV gear inside the fuselage.
* Optional belly mapping camera bay and camera mount for mapping.
* Optional Tefl0n cover for fuselage bottom, super durable, protecting the fuselage bottom from scratches on landing.
* Texture marked on both sides of fuselage for a more secure hand launch grip.
Introduce about FPV READY: Nano Talon EVO plane PNP with ZOHD Kopilot Lite Flight Controller and ZOHD VC400 All-in-one Video Camera (CP Antenna).
VC400 PIGGYBACK AIO NTSC FPV Camera (CP Antenna) Specs
Frequency band: 5.8GHZ
Input voltage: 7-28V
Video format: NTSC
Antenna connector: Clover / Dipole
Camera resolution: 600TVL
Field of View: 120 degrees
Weight: 8g
Size: 24*15*10mm
Output power: 0.1mW / 25mW / 200mW / 400mW
Product Weight: 8g
Operating current: 90mA (0.1mW) 150mA (25mW) 270mA (200mW) 360mA (400mW)
Product Size(L x W x H): 24 x 15 x 10mm
VC400 PIGGYBACK AIO NTSC FPV Camera (CP Antenna) Features
* With OSD to show Power-on time and Input Voltage, so you can know how long you can keep flying.
* 3-in-1 AIO integrated design, with camera, VTx and antenna, ultra-light weight and small size, best solution for light-weight airplanes.
* Up to 2.5km video transmission ra nge on 400mW.
* Default JST plug and up to 25cm power cable, longer enough for most small size airplanes.
* Wide voltage input from 7-28V, safe for all kinds of battery or BEC input.
* Switchable between 0.1mW / 25mW / 200mW / 400mW.
* With customized ve1cro strap to hold the camera and EVA foam for anti-vibration.
* Optional Clover / Dipole antenna for different airframes and flight mode (for straight line flights or flying around).
* Allows you to display customized Call Signs.
* 5.8Ghz VTx with 40 racing channels.
* Power cable were soldering and fixed by silica glue, solid even in a crash.
Kopilot Lite Autopilot System Specs
Supported receiver: PWM, PPM, S-Bus.
Supported planes: T-tail, V-Tail, Flying Wing/ De1ta Wing.
Supported mode: Home(RTH), Fence (RAD), Stabilization modes.
Operation temperature: -10℃-50℃
Servo connector: 4 connectors
Package Weight: 83g
Package Size (L x W x H):113 x 84 x 29mm
Kopilot Lite Autopilot System Features
* Easy installation, minimal wiring. Super easy setup.
* Return to Home (RTH) Fence (RAD) and Stabilization modes on a 3 position switch.
* Powerful stabilization and RTH algorithm.
* Supports T-Tail, V-Tail and Flying Wing/ De1ta configurations.
* Fast SAT lock.
* Mini-size GPS unit for ultra-light setups.
* Adjustment board removable for a light-weight setup.
* AIL, ELE, THR, RUD + AUX to control your servs. Landing gear and flaps go straight to RX.
* Launch assistant and motor blocking for no SAT fix.
* Computer-free programming.
* Completely transparent. Switch it off and use it as a mixing board only.
* Easy to transfer between planes.
ZOHD Nano Talon EVO Price
Banggood Price:US$151.99