Eachine Tyro79 Pro DIY 140mm F4 AIO 35A ESC 4S 3 Inch FPV Racing Drone
Notice:
1. The Gyro is BMI270, which is not compatible very well with the latest firmare. So do not flash and keep the Default firmware out from factory.
2. There is RC and R2 pad on flight controller board. Pls do notice and solder carefully ( Click the Diagram Picture Link and refer to it)
Introduction:
Upgrade Tyro79 Into Tyro79 Pro version.
1. Equipped with New Mini F4 FC AIO 35A ESC
2. Adds 3D Printing Protective Covers for Motors
3. Adds Fixing Base for Installing Receiver
4. Equipped with Runcam Nano 2 FPV Camera
Specification:
Brand: Eachine
Model: Tyro79 Pro
Item Name: DIY 140mm F4 4S 3 Inch FPV Racing Drone
Version: PNP Without Receiver
Dimension: 126x126x52mm
Weight: 161.5g ( without Lipo battery)
140mm Frame Wheel base: 140mm
Frame armthickness: 3mm
Upper plate thickness: 1mm
Side plate thickness: 1mm
Frame kit material: 3K carbon fiber & CNC 6065 aluminium
1607 2800KV Motor KV: 2800KV
Lipo cell: 2-4S
Weight: 17.8g (includes wires)
Output shaft length: 14mm
Maximum pull: signal 630g (4S 3030 4-blade propeller)
Maximum power: 350W
Configu-ration: 9N/12P
Mounting holes distance: 12*12mm
Mounting holes: φM2
Bearing: NSK
N52 Strong NdFeB Magnet
MINI F4 AIO 35A ESC
( Diagram Picture)
Flight Controller:
MCU: STM32F411
OSD: AT7456E
Gyro: BMI270
Blackbox: NO
BEC Output: 5V 2A, 9V 2A
URATS: 2
Firmware: Mini F411 AIO
ESC:
Con. Current: 35A
-BLHeli_S
ESC Telemetry: NO
Recommend Lipo: 2-4S
Mounting Hole: 20.5X20.5mm, M3
Dimension: 41x37mm
Weight: around 11.6g
3040 3-Blade Propeller
Quantity: 4 CW + 4 CCW
Color: Transparent White
XF5805 5.8G 40CH 25/100/400mW VTX 5.8G 40CH 25/100/400mW VTX
Runcam Nano 2 FPV Camera
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 700TVL
Dimensions: L14xW14xH16mm
Package Included:
1x Tyro79 Pro FPV Drone ( DIY, need assemble)
