iFlight BOB57 BLITZ F7 6 Inch 6S Cinematic FPV Racing Drone

Features:
– 6 inch drone re-engineered: This drone was specifically designed for 6 inch
– H-shaped frame with robust middle section for less props in view while remaining stiffness
– XT60 front-mount: Compare to other drones the mount sits in the front and gives more space on the back.
– Built in BEC to directly power for gopro (no battery needed)
– Hy motor design: This motor is optimized for 6 inch. Can be used with bi- blades (efficiency) and tri-blades (agilty & trust).
– Antenna mount: Solid antenna mount for less ocillations when using long antennas
– Long back bone: Enough space up to 3000mAh 6S batteries
– Gladiator shell: Protection shell from dust and water droplets (shall be removed for maximum flight time)
– GPS: A high-end GPS is used to minimize the risk of failure during proximity flights
– ESC: The drone consists iFlight’s new ESCs with built-in spike absober for more reliability
– 9 mins. flight time testing with 1800mAh 6S
– 9+ testing with 3000mAh 6S Lipo or 4000mAh 6S Li-Ion
Specification:
Brand: iFlight
Model: BOB57
Item Name: F7 6 Inch 6S FPV Racing Drone
Frame Kit
Upper(middle) plate thickness: 2.5mm
Bottom plate thickness: 1.5mm
Total Dimensions: 254*254mm
Bottom to top distance: 22mm
Geometry: H-shaped frame
Top plate thickness: 2mm
Arm Thickness: 6mm
BLITZ F7 Flight Controller
( Product Link)
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
BLITZ E55 55A 4IN1 ESC
( Product Link)
Model: BLITZ E55
Item Name: BLITZ E55 55A ESC
– Mounting Holes: 30.5*30.5mm/Φ4mm
– Weight: 15.3g
– Supports 2-6S lipo input
– MCU:G071
– Constant: 55 Amps
– Burst: 65 Amps
– Current sensor: Yes
– BEC: No
– Current rate: 200
– Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
– Target: IFLIGHT_BLITZ_G2
Ellisvanjason 2506 motors
2506.5 1500KV 6S
Gemfan 6032 3-Blade propellers
2 CW + 2 CCW ( In Green)
2 CW + 2 CCW ( In Black)
Package Included:
1x Pre-built and Tested BOB57 FPV Drone
1x Type-C USB Cable
1x Albatross LHCP 5.8GHz SMA FPV Antenna 150mm
1x Albatross LHCP 5.8GHz SMA FPV Antenna 60mm
2x Battery Strap